Cow Mattresses Meadow Valley

DLG-APPROVED: "Defofability/Elasticity, Permanent Tread Load"

Download print version

Test report 7528

The approval

A test mark “DLG APPROVED for individual criteria“ is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. 

The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The DLG Approved Test “Deformability/Elasticity, Permanent Tread Load” includes technical measurements on test stands of the DLG Test Center. The deformability and elasticity were measured and a permanent tread load was applied. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not investigated.

Test results

DLG Quality profilEvaluation*
Deformability and elasticity in new condition■■■■■ 
Deformability and elasticity following endurance test■■■■■ 
Lasting deformation following endurance test■■■■■ 
Wear following endurance test■■■ 

*    DLG Evaluation range:
■■■  or better = meets, exceeds or significantly exceeds the established DLG standards,   
■■ = meets the legal requirements for marketability
= failed

Requirements of DIN 3763 are fulfilled for the tested criteria.  Deformation and elasticity corresponds to class 2 DIN 3763 for single pens for calves

Manufacturer and contact information

Spinder Dairy Housing Concepts
Zeppelinlaan 3
9207 JG Drachten
Netherlands

Contact: 
Phone 0031 (0)5122 37801
sales@spinder.nl
https://www.spinder.nl