Huber Technik Comfort Roll N25

DLG-APPROVED “Deformability/elasticity, permanent tread load”

Download print version

Test report 7250

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not tested.

Huber Technik Comfort Roll N25

Assessment – Brief Summary

The comfort flooring N25 tested here, an elastic floor covering in the cubicle area for high boxes in cubicle stables, was tested for durability and comfort properties in the DLG-approved individual criteria test on test stands. In particular, the resistance to long-term footfall and the deformability and elasticity were tested.

DIN 3763 requirements are met. Deformability and elasticity class 2 according to DIN 3763.

Table 1: Test results

 

DLG Quality profileEvaluation*
Deformability and elasticity in new condition
■■■■
Deformability and elasticity following endurance test
■■■■
Lasting deformation following endurance test
■■■■■
Wear following endurance test
■■■

* DLG Evaluation range:    
■■■ or better = meets, exceeds or significantly exceeds the established DLG standards,
■■  = meets the legal requirements for marketability,
 = failed

Applicant and Test implementation

Manufacturer and Applicant

Manufacturer and Applicant
Huber Technik Vertriebs GmbH, 
Robert Bosch Straße 8, 85435 Erding, 
Germany

Contact:
Phone 08122 8691-22,
Fax 08122 8691-78
vertrieb@huber-technik.de
www.cow-comfort-huber.com 

Further information

Testing agency
DLG TestService GmbH, 
Gross-Umstadt location
The tests are conducted on behalf of DLG e.V.

Department
Agriculture

Division head
Dr. Ulrich Rubenschuh

Test engineer(s)
Dr. Harald Reubold *

*    Author

Contact us

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org