Alley Mat profiDRAIN

DLG-Approved: "Deformability/Elasticity, Permanent Tread Load, Slip resistance, Abrasion, Acid resistance"

Download print version

Test report 7563

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not tested.

Test results

Dlg Quality profileEvaluation*
Deformability and elasticity * 
– in new condition and following endurance test■■■■■ *
– following endurance test■■■■■  *
– lasting deformation following endurance test■■■■■  *
– no noticeable wear or damage following endurance test■■■ *
Abrasion■■■ *
Slip resistance **■■ **
Acid resistance *** 
– Resistance to feed acid mixture■■■
– Resistance to uric acid■■■
– Resistance to sulfurous acid■■■
– Resistance to ammonia■■■
– Resistance to barn disinfectants■■■
– Resistance to peracetic acid■■■

*    DLG Evaluation range:
■■■  or better = meets, exceeds or significantly exceeds the established DLG standards,   
■■ = meets the legal requirements for marketability
= failed

**  Single criteria slip resistance:   ■■  = passed,   = failed

Requirements DIN 3763 fullfiled  for the tested criteria. 

Manufacturer and contact information

Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8, 
84529 Tittmoning
Germany

Contact: 
Phone +49 8683 701-0, 
Fax +49 8683 701-126
info@kraiburg-elastik.de 
www.kraiburg-elastik.de