HayFIL round bale winding net

DLG QUALITY SEAL: "Continuous Monitoring"

Download printable version

Test Report 7466

The certification mark

The DLG QUALITY SEAL for operating equipment and consum­ables encompasses products, which are subjected to extensive testing of their value-determining and advertised characteristics.

The tested criteria and the requirements to be fulfilled are specified by independent commissions and are designed – over and above legal requirements – to prove the product’s fitness for purpose, its advertised characteristics and practical requirements.

Testing contents and requirements are developed further by the responsible specialist departments of the DLG e.V. in line with the applicable legislation, as well as with technical and scientific progress. Successful testing is concluded with the assignment of the DLG QUALITY SEAL. The approved products are then published. Other criteria were not investigated.

Assessment in brief

The round bale winding net HayFIL tested here was tested in the DLG quality seal test on test benches and in the ­laboratory for mechanical, physical and aging properties and measured the running length. In the practical investigations, the handling was assessed. The net is designed for the mechanical winding of bales made with round bales for silage pre­paration, hay and straw.

Table 1: Assessment in brief

DLG quality profileRequirementEvaluation
Net length ≥ nominal length at 5 % preload
Meter weight  nominal meter weight ± 5 %
Maximum traction force ≥ 300 N (measured on 7 threads)
Maximum tractionmean ≥ 18.5 N/cm
Maximum tensile forceminimum-value ≥ 17.5 N/cm
Elongation at maximum tensile force15 %-25 %
Maximum pulling force after agingmean ≥ 15.5 N/cm
Elongation at maximum tensile force after aging≤ 30 % reduction in relation to new condition
Change in measure after hot storageshrinkage ≤ 30 %

* Evaluation range: requirements fulfilled (✔)

Manufacturer and applicant

Manufacturer and applicant
Polifil Ambalaj San. Tic. A. S.
Geposb 1. Cadde 12. Sokak
41400 Gebze Kocaeli, Turkey

Contact
Phone +90 262 7510892
yaseminkeskin@polifilas.com
www.polifilas.com

Contact us

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org