LED waterproof luminaire 793-Resistube

DLG-APPROVED: “Resistance to ammonia”

Download print version

Test report 7586

The approval

A test mark “DLG APPROVED for individual criteria” is ­awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognized evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognized rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.

The ammonia resistance test was performed as a laboratory test according to the patented DLG test standard. This test is intended to determine the suitability of equipment for animal living areas to withstand the impacts of animal environments. 

Other critera were not tested.

Assessment in brief

The LED waterproof luminaire “793-Resistube” from IBV Hungária Kft. passed the ammonia resistance test with an preservation of luminous flux of 84.3 %. The version with 1,500 mm were tested. Excerpts from the associated DLG test frame can be found here

DLG Quality profileEvaluation*
Resistance to ammonia

Evaluation range: Requirements fulfilled () /  Requirements not fulfilled (X)

Manufacturer and product information

Manufacturer and applicant

IBV Hungária Kft, Csanyi út 71, 6100 Kiskunfélegyháza, Hungary

Technical data (Manufacturer information)

 

LED waterproof luminaire 793-Resistube

 

793-36W

793-48W

Rated input power

36 W

48 W

Length x Diameter

1,200 mm x 75 mm

1,500 mm x 75 mm

Material

opalised Acrylic (PMMA)

Contact 

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org