Quieta Evolution

DLG-APPROVED: Deformability/elasticity, permanent tread load

Download print version

Test report 7557

The approval

A test mark „DLG-APPROVED for individual criteria“ is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing).

Other criteria were not tested.

Test results

The Quieta Evolution cowmattress tested here, an elastic floor for cubicles in cubicle houses, was inves­tigated with regard to durability and comfort properties on test stands in the DLG Approved Test. The deformability and elasticity were measured and a permanent tread load was applied. Requirements of DIN 3763 are fulfilled in the examined criteria; Deformability and elasticity class 4 according to DIN 3763.

DLG quality profileEvaluation*
Deformability and elasticity in new condition

■■■■■

Deformability and elasticity following endurance test

■■■■■

Lasting deformation following endurance test

■■■■■

No noticeable wear following endurance test

■■■■

*    DLG Evaluation range: ■■■  or better = meets, exceeds or significantly exceeds the established DLG standards, ■■  = meets the legal requirements for marketability,  ■ = failed

 

Manufacturer and applicant

ID Group, 
47 Voie St Exupéry, 
73800 PORTE DE SAVOIE, France
Phone + 33 479 843606, 
https://www.id.group 

Contact us

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org