Huber Technik comfort roll N33

DLG-APPROVED “BTS Cattle (Females)”

Download print version

Test report 7248

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The DLG Approved “BTS Cattle1” included joint inspections and behavioural observations during standing up and lying down in three working farms, as well as measurement of deformability on test rigs at the DLG Test Center Technology and Farm Inputs. Data was acquired and analysed in accordance with the “Requirements of the BTS Programme Regarding Deformable Mattresses for Bovine Livestock” (Swiss Ethics Programme Ordinance of 23th October 2013, Annex 6) and DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing).

Other criteria were not tested. 

Huber Technik comfort roll N33

Assessment – brief summary

Table 1: test results

DLG Quality profileEvaluation*
Deformability and elasticity in new condition
■■■■■
Deformability and elasticity following endurance test
■■■■■
Lasting deformation following endurance test
■■■■■
Wear following endurance test
■■■


* The DLG test framework provides the following options in its evaluation schemes:
■ ■ ■  or better = meets, exceeds or clearly exceeds the specified DLG standard,
  = meets the requirements,  = failed

Requirements DIN 3763 fulfilled. Deformability and elasticity Class 3 according to DIN 3763.

Applicant and test implementation

Manufacturer and Applicant

Huber Technik Vertriebs GmbH
Robert Bosch Str. 8
85435 Erding, Germany

Contact:
Phone +49 (0)8122 8691-22
Fax +49 (0)8122 8691-78
vertrieb@huber-technik.de
www.kuh-komfort-huber.com

Contact us

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org