Alley Mat KURA SB

DLG-Approved "Deformability/Elasticity, Permanent Tread Load"

Download print version

Test report 7446

The approval

A test mark “DLG-APPROVED for individual criteria“ is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consul­tation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scien­tific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.

The DLG Appoved Test “Deformability/Elasticity, Permanent Tread Load” includes technical measurements on test stands of the DLG Test Center. The deformability and elasticity were measured and a permanent tread load was applied. The test was based on the DLG Testing Frameworks for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not investigated.
 

Test results

Table 1: Overview of results

Dlg Quality profileEvaluation*
Lying measurement deformability and elasticity in new condition■■■■■ 
Lying measurement deformability and elasticity following endurance test■■■■■ 
Walking measurement deformability and elasticity in new condition■■■■■ 
Walking measurement deformability and elasticity following endurance test ■■■■■ 
Lasting deformation following 250.000 endurance test ■■■■■
No noticeable wear and no damage following 250.000 endurance test ■■■

*    DLG Evaluation range:
■■■  or better = meets, exceeds or significantly exceeds the established DLG standards,   
■■ = meets the legal requirements for marketability
= failed

Requirements of DIN 3763 are fulfilled for the tested criteria.  Deformation and elasticity corresponds to class 2 DIN 3763 for single pens for calves

Manufacturer and contact information

Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning 
Germany

Phone +49 (0)8683 701-0
Fax +49 (0)8683 701-126, 
info@KRAIBURG-elastik.de 
www.KRAIBURG-elastik.de 

Contact us

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org