Download print version
Test report 7522
The approval
A test mark “DLG APPROVED for individual criteria” is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.
The DLG Approved Test “Deformability/Elasticity, Permanent Tread Load, Abrasion, Slip resistance” includes technical measurements on test stands of the DLG Test Center. The deformability and elasticity, the abrasion resistance, the slip resistance, were measured and a permanent tread load was applied. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and Testing). Other criteria were not investigated.
Test results
Table 1: Overview of results
Dlg Quality profile | Evaluation |
Deformability and elasticity – in new condition and following endurance test | ■■■■■ * |
Deformability and elasticity – following endurance test | ■■■■■ * |
Lasting deformation following endurance test | ■■■■■ * |
Wear following endurance test | ■■■■■ * |
Abrasion | ■■■■■ * |
Slip resistance | ■■ ** |
* DLG Evaluation range:
■■■ or better = meets, exceeds or significantly exceeds the established DLG standards,
■■ = meets the legal requirements for marketability
■ = failed
** Single criteria slip resistance: ■■ = passed, ■ = failed
DeLaval International AB site Glinde
P.O. Box 1136,
DE-21509 Glinde/Germany
Phone +49 (0)40 303344-308,
Fax +49 (0)40 303344-349
Mathias.Reichert@delaval.com ,
www.delaval.com
Contact us
DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org