LED moisture-proof lamp FarmTUBE

DLG-APPROVED „Resistance to Ammonia“

Download printable version

Test Report 7478

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognized evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognized rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.

The ammonia resistance test was performed as a laboratory test according to the patented DLG test standard.
This test is intended to determine the suitability of equipment for animal living areas to withstand the impact of animal environments. Other critera have not been assessed.

Assessment – Brief Summary

The LED light “FarmTUBE” passed the ammonia resistance test with a preservation of the luminous flux of 97,3 %. The FarmTUBE 1.5 m was tested. Excerpts from the associ­ated DLG test frame can be found here,

DLG QUALITY PROFILEEvaluation**                               
Ammonia resistance

■■■■

Preservation of the luminous flux

■■■■■


* The DLG test framework provides the following options in its evaluation schemes:  
 ■ ■ or better = meets, exceeds or clearly exceeds the specified DLG standard, ■■ = meets the legal re­quire­ments for marketability,  ■ = failed

Manufacturer and product information

Manufacturer and applicant

Albert Kerbl GmbH, Felizenzell 9, 84428 Buchbach, Germany

Technical Data**

 Art. No. 345641Art. No. 345642
Length x diameter1,200 mm x 86 mm1,500 mm x 86 mm
Cover materialPMMA
Material of the end partsstainless steel

** manufacturer information