Download print version
Test report 7541
The approval
A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognized evaluation criteria. The test is intended to highlight particular innovations and key criteria of
the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test
results will be specified in consultation with an expert group of DLG. They correspond to the recognized rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.
The ammonia resistance test was performed as a laboratory test according to the patented DLG test standard. This test is intended to determine the suitability of equipment for animal living areas to withstand the impact of animal environments. Other critera have not been assessed.
Assessment in brief
The LED light “KRHBMVMC High Bay 100-200W 3000-5000K” from Kramp Groep B.V. passed the ammonia resistance test with a preservation of the luminous flux of 73.6 %. The version with 200 W was tested. Excerpts from the associated DLG test frame can be found at: https://www.dlg-testservice.com/fileadmin/Redaktion/downloads/landwirtschaft/flyer/DLG-Pruefrahmen_Leuchtsysteme_in_Staellen_en.pdf
Table 1: Overview of results
| DLG QUALITY PROFILE | Evaluation* |
| Ammonia resistance | ■■■■■ |
| Preservation of the luminous flux | ■■■■■ |
* The DLG test framework provides the following options in its evaluation schemes:
■ ■ ■ or better = meets, exceeds or clearly exceeds the specified DLG standard, ■ ■ = meets the legal requirements for marketability, ■ = failed
Manufacturer and product information
Manufacturer and applicant
Kramp Groep B.V.
Breukelaarweg 33
7051 DW Varsseveld
Niederlande
Technical data**
KRHBMVMC | |||
| High Bay 100W | High Bay 150W | High Bay 200W | |
| Rated input power | 100 W | 150 W | 200 W |
| Diameter | 265 mm | ||
| Material | housing: aluminium; diffusor: glass | ||
** manufacturer information