Download print version
Test report 7249
The approval
A test mark “DLG-APPROVED for individual criteria“ is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not tested.
Assessment – Brief Summary
The comfort flooring N 33 tested here, an elastic floor covering in the cubicle area for high boxes in cubicle stables, was tested for durability and comfort properties in the DLG-approved individual criteria test on test stands.
In particular, the resistance to long-term footfall, deformability and elasticity were tested.
DIN 3763 requirements are met. Deformability and elasticity class 3 according to DIN 3763.
Table 1: Test results
DLG Quality profile | Evaluation* |
Deformability and elasticity in new condition | ■■■■■ |
Deformability and elasticity following endurance test | ■■■■■ |
Lasting deformation following endurance test | ■■■■■ |
Wear following endurance test | ■■■ |
* The DLG test framework provides the following options in its evaluation schemes:
■ ■ ■ or better = meets, exceeds or clearly exceeds the specified DLG standard,
■ ■ = meets the requirements, ■ = failed
Requirements DIN 3763 fulfilled. Deformability and elasticity Class 3 according to DIN 3763.
Manufacturer and Applicant
Huber Technik Vertriebs GmbH
Robert Bosch Str. 8
85435 Erding, Germany
Contact:
Phone +49 (0)8122 8691-22
Fax +49 (0)8122 8691-78
vertrieb@huber-technik.de
www.kuh-komfort-huber.com
Contact us
DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org