Download print version
Test reports 7288
The approval
A test mark „DLG-APPROVED for individual criteria“ is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.
The DLG Appoved Test “Deformability/Elasticity, Permanent Tread Load” includes technical measurements on test stands of the DLG Test Center. The deformability and elasticity were measured and a permanent tread load was applied. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing).
Other criteria were not investigated.
Table 1: Assessment in brief
DLG Quality profile | Evaluation* | |
Deformability and elasticity in new condition | ■■■■■ | |
Deformability and elasticity following endurance test | ■■■■■ | |
Lasting deformation following endurance test | ■■■■■ | |
Surface wear following endurance test | ■■■ | |
Underside no noticeable wear after endurance test | ■■■■ |
DLG Evaluation range:
* ■■■ or better = meets, exceeds or significantly exceeds the established DLG standards,
■■ = meets the legal requirements for marketability,
■ = failed
Manufacturer and Applicant
Manufacturer and Applicant
Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Germany
Contact:
Telephone +49 08683 701-0
Fax +49 08683 701-126
info@kraiburg-elastik.de
www.kraiburg-elastik.de
Further information
Testing agency
DLG TestService GmbH,
Gross-Umstadt location
The tests are conducted on behalf of DLG e.V.
DLG test framework
DLG Testing Framework for elastic stable flooring, as of April 2010
Department
Agriculture
Division head
Dr. Ulrich Rubenschuh
Test engineer(s)
Dr. Harald Reubold *
* Author
Contact us
DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 • 64823 Groß-Umstadt • Tel: +49 69 24 788-600 • tech@DLG.org