Skip to main content

Gummiwerk KRAIBURG Elastik GmbH & Co. KG Rubber mat LOSPA SB

DLG-APPROVED “Deformability/Elasticity, Permanent Tread Load”

Download printable version

The Approval

A test mark „DLG-APPROVED for individual criteria“ is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricul­tural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing).

Other criteria were not investigated.

Test results

Table 1: Assessment in brief

Requirements DIN 3763 are fulfilled for the tested criteria. Deformation and Elasticity corresponds to class 1 DIN 3763 for single pens for calves.

DLG Quality profileEvaluation*
Lying measurement deformability and elasticity in new condition■■ 
Lying measurement deformability and elasticity following endurance test■■ 
Walking measurement deformability and elasticity in new condition■■■■■ 
Walking measurement deformability and elasticity following endurance test■■■■■ 
Lasting deformation following endurance test■■■■■ 
Wear following endurance test■■■■ 

DLG Evaluation range:
* ■■■ or better = meets, exceeds or significantly exceeds the established DLG standards,
■■  = meets the legal requirements for marketability,
■ = failed

Applicant and Test implementation

Manufacturer and Applicant

Manufacturer and Applicant
Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Germany

Contact:
Telephone +49 08683 701-0
Fax +49 08683 701-126
info@kraiburg-elastik.de 
www.kraiburg-elastik.de 

Further information

Testing agency
DLG TestService GmbH, 
Gross-Umstadt location
The tests are conducted on behalf of DLG e.V.

DLG test framework
DLG Testing Framework for elastic stable flooring, as of April 2010 

DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing)

Department
Agriculture

Division head
Dr. Ulrich Rubenschuh

Test engineer(s)
Dr. Harald Reubold *

*    Author

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org