Skip to main content

Advanced Comfort Technology Inc., ACT-DCC Waterbed for Cubicles

DLG-APPROVED "Deformability/Elasticity, Permanent Tread Load, Abrasion, Slip resistance"

Download printable version

The Approval

A test mark „DLG-APPROVED for individual criteria“ is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not tested.

Test results

Table 1: Assessment in brief

DLG Quality profileEvaluation*
Deformability and elasticity in new condition

■■■■■

 
Deformability and elasticity following endurance test

■■■■■

 
Lasting deformation following endurance test

■■■■■

 
Wear following endurance test

■■■■

 
Abrasion/Wear resistance

■■■■

 
Slip resistance 

■■

**

DLG Evaluation range:
* ■■■ or better = meets, exceeds or significantly exceeds the established DLG standards,
  ■■  = meets the legal requirements for marketability,
  = failed

Requirements DIN 3763 fulfilled. Deformability and elasticity Class 2 according to DIN 3763.

Applicant

Manufacturer and contact information

Manufacturer and Applicant 
Advanced Comfort Technology Inc., 
752 Lois Drive, 
Sun Prairie, WI 53590, US

Contact:Contact:
Telephone 00 608 709 2693,
Fax 00 608 709 2615 
support@advancedcomforttechnology.com 
www.dccwaterbeds.com  

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org