Skip to main content

LED Moisture-proof luminaire “Type FL16 ABS”

DLG-APPROVED „Resistance to ammonia, cleaning distance“

Download printable version

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognized evaluation criteria. The test is intended to highlight particular innovations and key criteria of  the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test  results will be specified in consultation with an expert group of DLG. They correspond to the recognized rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing  is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for  five years from the date of awarding. The ammonia resistance test was performed as a laboratory test according to the patented DLG test standard. This test is intended to determine the suitability of equipment for animal living areas to withstand the impact of animal environments. The cleaning distance test assesses the suitability for cleaning animal living areas. Other critera have not been assessed.

Assessment – Brief Summary

The LED luminaire “Type FL16 ABS” passed the “ammonia resis­tance” test with a preservation of the luminous flux of 78.5 % and the cleaning distance test. The LED luminaire in the length of 615 mm and 1455 mm was tested. Excerpts from the associ­ated DLG test frame can be found here,
 

DLG QUALITY PROFILEEvaluation**                               
Ammonia resistance

■■■■

Preservation of the luminous flux

■■■■■

Cleaning distance

■■■


* The DLG test framework provides the following options in its evaluation schemes:  
 ■ ■ or better = meets, exceeds or clearly exceeds the specified DLG standard,  = meets the legal re­quire­ments for marketability,   = failed

 

Manufacturer and product information

Manufacturer and applicant

argon lighting GmbH, Ziegler Straße 19, 33161 Hövelhof, Deutschland, Germany
 

Technical Data**

“Type FL16 ABS”
 

1.2 ft

1.4 ft

1.5 ft

Length x width x height615 mm x 95 mm x 85 mm1.175 mm x 95 mm x 85 mm1.455 mm x 95 mm x 85 mm
Material

diffuser: transparent AC, body: dark grey ABS

Rated input power

8 - 15 W

16 - 43 W

20 - 54 W

** manufacturer information

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org