Skip to main content

LED Moisture-proof luminaire PACD E-XT

DLG-APPROVED „Resistance to ammonia“

Download printable version

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have successfully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognized evaluation criteria. The test is intended to highlight particular innovations and key criteria of 
the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They correspond to the recognized rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for 
five years from the date of awarding.

The ammonia resistance test was performed as a laboratory test according to the patented DLG test standard. This test is intended to determine the suitability of equipment for animal living areas to withstand the impact of animal environments.

Other critera have not been assessed.

Assessment – Brief Summary

The LED luminaire PACD E-XT passed the “ammonia resis­tance” test with a preservation of the luminous flux of 78.5 %. The PACD E-XT L1500 was tested. Excerpts from the associated DLG test frame can be found at: 

Table 1: Assessment in brief

Ammonia resistance
Preservation of the luminous flux

* The DLG test framework provides the following options in its evaluation schemes:
■ ■ ■ or better = meets, exceeds or  clearly exceeds the specified DLG standard,  ■ ■ = meets the legal re­quire­ments for marketability,  = failed

Manufacturer and Applicant

Manufacturer and applicant
Leuchten-Technik Tettnang GmbH & Co. KG,
Postfach 1264,
88061Tettnang, Germany

Technical data**

Length x width x height1,219 mm x 90 mm x 105 mm1,515 mm x 90 mm x 105 mm
Cover materialPMMAPMMA
Number of the stainless steel clips1418

**    manufacturer information


DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 •