Skip to main content

Huber Technik Vertriebs GmbH Comfort Roll N20

DLG-APPROVED: "Full Test"

Download printable version

The approval

A test mark “DLG-APPROVED for individual criteria” is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2020-04 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not tested.

Assessment – Brief Summary

Table 1: Test results

DLG quality profileEvaluation*
Technical criteria 
Lasting deformation following endurance test
■■■■■
Waer following endurance test
■■■■■
Abrasion/Wear resistance
■■■■
Resistance to feed acid mixture ***
■■■
Resistance to uric acid ***
■■■
Resistance to sulfurous acid ***
■■■
Resistance to ammonia ***
■■■
Resistance to barn disinfectants ****
■■■
Resistance to peracetic acid ***
■■■
Dimensional stability
■■■■
Installation by the owner 
■■■■■
Installation instructions
■■■■■
Cleaning
■■■■
Recyclingconzept
■■■■■
Animal-related criteria 
Behaviour observations 
■■■■
Selection behavior
■■■■■
Slip resistance **
■■
Secure foothold of the animals **
■■
Deformability and elasticity in new condition
■■■■
Deformability and elasticity following endurance test
■■■■
Toxicological safety 
■■■■■
Joint evaluation
■■■■


* The DLG test framework provides the following options in its evaluation schemes:
 ■ ■  or better = meets, exceeds or clearly exceeds the specified DLG standard,

■ ■ = meets the requirements,  = failed
** Single criteria slip resistance:   = passed,  = failed
*** Single criteria acid resistance:  ■ ■ = resistant, ■ ■ = limited resistant,  = failed

Requirements DIN 3763 fulfilled. Deformability and elasticity Class 2 according to DIN 3763.

Manufacturer and contact information

Manufacturer and Applicant

Huber Technik Vertriebs GmbH
Robert Bosch Str. 8
85435 Erding, Germany

Contact:
Phone +49 (0)8122 8691-22
Fax +49 (0)8122 8691-78
vertrieb@huber-technik.de
www.kuh-komfort-huber.com

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org