Skip to main content

Huber-Technik Vertriebs GmbH Calf floor “KalbKomfort N20 Prärie”

DLG-APPROVED: "Deformability/Elasticity, Permanent Tread Load"

Download printable version

The Approval

A test mark “DLG-APPROVED for individual criteria“ is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular inno­vations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consul­tation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scien­tific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding.

Assessment – Brief Summary

The calf floor “KalbKomfort N20 Prärie” tested here, was investiga­ted with regard to durability and comfort properties on test stands in the DLG Test. The deformability and elasticity of the calf floor were measured and a permanent tread load was applied. Requirements DIN 3763 are fulfilled for the tested criteria. Deformation and Elasticity corres­ponds to class 2 DIN 3763 for single pens for calves.

Table 1: Overview of results

DLG Quality profileEvaluation*
Lying measurement deformability and elasticity in new condition 
■■■■
Lying measurement deformability and elasticity following endurance test
■■■■
Walking measurement deformability and elasticity in new condition
■■■■■
Walking measurement deformability and elasticity following endurance test
■■■■■
Lasting deformation following 250,000 endurance test
■■■■■
No noticeable wear and no damage following 250,000 endurance test
■■■■

*DLG Evaluation range:
 ■ ■  or better = meets, exceeds or significantly exceeds the established DLG standards, 
■ ■ = meets the legal requirements for marketability,  = failed

Manufacturer and contact information

Manufacturer/Applicant

Huber Technik Vertriebs GmbH
Robert Bosch Str. 8
85435 Erding, Germany

Contact
Phone +49 (0)8122 8691-22
Fax +49 (0)8122 8691-78
vertrieb@huber-technik.de
www.kuh-komfort-huber.com

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org