Skip to main content

Huber-Technik Vertriebs GmbH Alley Flooring N 26 ALLEY  

DLG-APPROVED: "Deformability/Elasticity, Permanent Tread Load, Slip resistance"

Download printable version

The Approval

A test mark „DLG-APPROVED for individual criteria“ is awarded for agricultural products which have success­fully fulfilled a scope-reduced usability testing conducted by DLG according to independent and recognised evaluation criteria. The test is intended to highlight particular innovations and key criteria of the test object. The test may contain criteria from the DLG test scope for overall tests, or focus on other value-determining characteristics and properties of the test subject. The minimum requirements, test conditions and procedures as well as the evaluation bases of the test results will be specified in consultation with an expert group of DLG. They corres­pond to the recognised rules of technology, as well as scientific and agricultural knowledge and requirements. The successful testing is concluded with the publication of a test report, as well as the awarding of the test mark which is valid for five years from the date of awarding. The test was based on the DLG Testing Framework for elastic stable flooring, as of December 2018 and DIN 3763:2022-08 (Elastic floorings for cattle and dairy cows walking and rest surfaces – Requirements and testing). Other criteria were not tested.

Assessment – Brief Summary

Table 1: Overview of results

DLG Quality profileEvaluation*
Deformability and elasticity in new condition
■■■■■
Deformability and elasticity in new condition
■■■■■
Lasting deformation following endurance test
■■■■■
Wear following endurance test
■■■■
Slip resistance
■■**

DLG Evaluation range:
*  ■ ■  or better = meets, exceeds or significantly exceeds the established DLG standards, 
■ ■ = meets the legal requirements for marketability,  = failed
**   Single criteria slip resistance:    =  passed,  =  failed

Manufacturer and contact information

Manufacturer and Applicant

Huber Technik Vertriebs GmbH
Robert Bosch Str. 8
85435 Erding, Germany

Contact
Phone +49 (0)8122 8691-22
Fax +49 (0)8122 8691-78
vertrieb@huber-technik.de
www.kuh-komfort-huber.com

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org