Skip to main content

Böck Silosysteme GmbH Silage film „800 % Film“

white, uv-stabilized, 125 μm

Download printable version

The certification mark

The DLG QUALITY SEAL for operating equipment and consum­ables encompasses products, which are subjected to extensive testing of their value-determining and advertised characteristics. The tested criteria and the requirements to be fulfilled are specified by independent commissions and are designed – over and above legal requirements – to prove the product’s fitness for purpose, its advertised characteristics and practical requirements. Testing contents and requirements are developed further by the responsible specialist departments of the DLG e.V. in line with the applicable legislation, as well as with technical and scientific progress. Successful testing is concluded with the assignment of the DLG QUALITY SEAL. The approved products are then published. Other criteria were not investigated.

Test results

Table 1: Assessment in brief

Film dimensions ≥ nominal length, ≥ 98% nominal width
Film thickness 0,119 ≤ d ≤ 131 mm
Material condition evenly coloured, free of streaks and pores
Tearing force in new condition longitudinally, transversely, over fold ≥ 25 N/cm
Elongation of tears in new condition longitudinally, transversely, over fold ≥ 400 %
Tear resistance in new condition longitudinally, transversely, over fold ≥ 17 MPa
Dart drop resistance in new condition declaration of manufacturer
Elongation of tear transversely after acid storage reduction ≤ 15 %
Tear resistance transverse after acid storage reduction < 10 %
Elongation of tears transversely after aging (weathering) > 350 %; reduction refered to the new film: < 30 %
Change in size after warm storage after aging longitudinally: ≤ 2 % / longitudinally: < 2 %
Oxygen permeability in 0,2 bar < 250 cm³/(m² · d)

Applicant

Manufactor/Applicant

Böck Silosysteme GmbH 
Stefan-Flötzl-Straße 24 
83342 Tacherting, Germany

Contact:
Telephone +49 (0) 8621 6466-0
Fax +49 (0) 8621 6466-46
info@boeck.de, www.boeck.de 

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org