Skip to main content

Silage film „800 % Film“

white, uv-stabilized, 125 μm

Download printable version

The certification mark

he DLG QUALITY SEAL for operating equipment and consum­ables encompasses products, which are subjected to extensive testing of their value-determining and advertised characteristics. The tested criteria and the requirements to be fulfilled are specified by independent commissions and are designed – over and above legal requirements – to prove the product’s fitness for purpose, its advertised characteristics and practical requirements. Testing contents and requirements are ­deve­loped further by the responsible specialist departments of the DLG e.V. in line with the applicable legis­lation, as well as with technical and scientific progress. Successful testing is concluded with the assignment of the DLG QUALITY SEAL. The approved products are then published. The DLG quality seal test included technical measurements in the laboratory and practical assessments. The test basis was the DLG test framework for Straw protection fleece made of continuous polypropylene fibres and a basis weight of 140 g/m², as of February 2022.

Test results

Table 1: Assessment in brief

Quality profile to DLG standards Evaluation
Suitability
Dimensions, weight
Strength in new condition
Strength after aging/weather resistance
Water permeability
Air flow

*    Evaluation range: requirements fulfilled (✔) / requirements not fulfilled (X)

Applicant

Manufactor/Applicant

ZILL GmbH & Co. KG
Hanns-Martin-Schleyer-Straße 31
89415 Lauingen
Germany

Contact:
Phone +49 (0)9072 9581-0
Fax +49 (0)9072 9581-30
info@zillnet.de 
www.zillnet.de 

Contact

DLG TestService GmbH - Groß-Umstadt location • Max-Eyth-Weg 1 64823 Groß-Umstadt Germany • Tel.: +49(0)69 24 788-611 • tech@DLG.org